Determination of sulfa antibiotic residues in river and particulate matter by field-amplified sample injection-capillary zone electrophoresis

In the present research, field-amplified sample injection–CZE (FASI–CZE) coupled with a diode array detector was established to determine trace level sulfa antibiotic. Sulfathiazole, sulfadiazine, sulfamethazine, sulfadimethoxine, sulfamethoxazole, and sulfisoxazole were selected as analytes for the experiments. The background electrolyte solution consisted of 70.0 mmol/L borax and 60.0 mmol/L boric acid (including 10% methanol, pH 9.1). The plug was 2.5 mmol/L borax, which was injected into the capillary at a pressure of 0.5 psi for 5 s. Then the sample was injected into the capillary at an injection voltage of –10 kV for 20 s. The electrophoretic separation was carried out under a voltage of +19 kV. The capillary temperature was maintained at 20˚C throughout the analysis, and six sulfonamides were completely separated within 35 min. Compared with pressure injection-CZE, the sensitivity of FASI-CZE was increased by 6.25–10.0 times, and the LODs were reduced from 0.2–0.5 to 0.02–0.05 μg/mL. The method was applied to the determination of sulfonamides in river water and particulate matter samples. The recoveries were 78.59–106.59%. The intraday and interday precisions were 2.89–7.35% and 2.77–7.09%, respectively. This provides a simpler and faster method for the analysis of sulfa antibiotic residues in environmental samples.     

Computational and dynamic NMR investigation of 2,2-dimesityl-1,1,1,3,3,3-hexamethyltrisilane

The structure and rotational barrier for the mesityl-silicon bond of 2,2-dimesityl-1,1,1,3,3,3-hexamethyltrisilane have been investigated by ¹H- and ¹³C-variable temperature nuclear magnetic resonance (NMR) as well as by density functional theory structural calculations. The calculations show that the lowest energy structure has C₂ symmetry with nonequivalent ortho methyl groups, consistent with the crystal structure and solution NMR. The nonequivalent ortho methyl groups exchange through a C_s transition state with a calculated relative free energy of 11.0 kcal mol⁻¹. The barrier for this rotation found by dynamic NMR is 13.4 ± 0.2 kcal mol⁻¹ at 298 K.     

氦原子与非对称替代氢分子碰撞(E=0.3eV)角分布计算

用密耦方法计算了非对称同位素替代分子与氦原子碰撞(He-HD,HT,DT)转动激发,当入射能量E=0.3 eV时,得到了上述碰撞体系的微分散射截面或角分布.基于上述理论计算,讨论了原子与双原子分子碰撞的同位素效应.     

气垫导轨在刚体转动惯量测定实验中的应用

本文介绍了一种测量刚体转动惯量的新方法。即把气垫导轨和刚体转动仪结合起来来测量刚体的转动惯量,使传统的气垫导轨实验和刚体转动惯量测定实验得以更新,提高了实验测量的精度,拓展了实验内容。     

Global fit analysis including the ν9 + ν4 − ν4 hot band of ethane: Evidence of an interaction with the ν12 fundamental

The ν₉ fundamental band of ethane occurs in the 12 μm region. It is the strongest band of ethane in a terrestrial window and is commonly used for the identification of ethane in the Jovian planets. The ν₉ + ν₄ − ν₄ band occurs in the same region; neither can be analysed as an isolated band, since both are embedded in the torsional bath of the ground vibrational state. We report here two global fit models including data from both of these bands as well as the ν₃ fundamental and the ν₄, 2ν₄ − ν₄, and 3ν₄ torsional transitions. The first is restricted to −5 ? KΔK ? 15 in the hot band and gives an excellent fit to the included data. Three resonant interactions are identified in this fit—a Coriolis interaction with two resonant cases between the ν₉ torsional stack and that of the ground vibrational state (gs) and a resonant Fermi interaction between the ν₃ fundamental and the gs. Hot band lines with KΔK < −5 are influenced by a fourth perturbation, with a crossing at −11 < KΔK < −10, which has been attributed to an interaction with the ν₁₂ fundamental. A second fit, demonstrating a promising treatment of this interaction, is also presented.     

Resistivity－temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere

The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ－T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ－T curve also showed that the orthorhombic－tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods.     

Estimation of growth rate in unidirectionally solidified multicrystalline silicon by the growth-induced striation method

Multicrystalline silicon was grown by unidirectional solidification method using the accelerated crucible rotation technique. The application of the accelerated crucible rotation technique in unidirectional solidification method induced growth striations across the axial direction of the grown crystal. This striation pattern was observed from carbon concentration distribution, obtained by using Fourier transform infrared spectroscopy. The generated striation pattern was found to be weak and discontinuous. Some striations were absent, probably due to back melting, caused during each crucible rotation. From the growth striations and applied time period in crucible rotation, the growth rate was estimated by using Fourier transformation analysis.     

Spectrofluorimetric Method for the Determination of Aluminum with Alizarin Red PS

 A simple and direct spectrofluorimetric method has been developed for the determination of aluminum using alizarin red PS (1,2,4-trihydroxy 9,10-anthraquinone-3-sulfonic acid). The method is based on the strong fluorescence (480/564 nm) of Al³⁺ and alizarin red. Experimental parameters such as pH, concentration of the ligand, ionic strength of the solution, reaction time and temperature were optimized in order to maximize the analytical signal. Interferences of several ions (anions and cations) were studied and evaluated. The linear range of the method extends from 3 to 100 μg L⁻¹. Limit of detection (3s_b) was 0.9 μg L⁻¹. The method was tested with a silicate certified reference material. Interferences were eliminated by a liquid extraction with cupferron. Author for correspondence. E-mail: aucelior@rdc.puc-rio.br Received September 10, 2002; accepted January 15, 2003 Published online May 5, 2003     

色质联用技术在毒物分析中的应用

从生物样品中检测未知物,一直以来是毒物分析中的一个难点。如何有效地提取目标化合物,并选择适合的检测手段将未知物筛选出来,GC-MS方法是快速筛选多种毒物和药物的一个简便、可靠的手段。随着MS技术的不断发展,更灵敏、更准确的特性将使其成为药物和毒物分析中必不可少的一门技术。     

事后分层方法及其在交通运输抽样调查中的应用

本文介绍事后分层技术，说明了它不仅可用于简单随机抽样，而且可以用于放回ＰＰＳ抽样。给出了事后分层估计量的形式，证明了它的无编性，并给出了它在交通运输抽样调查中的应用。